Cosmetic packaging materials are divided into internal packaging and outsourcing, and can also be divided into soft packaging and hard packaging. The quality of packaging materials directly determines the brand image of the product. Therefore, I will talk about the packaging material products based on the needs and standards of different packaging material purchasing users. Its basic quality requirements are for your reference:
    1. Basic requirements for containers and supporting packaging materials:
    1. bottle
    The bottle body should be stable, the surface should be smooth, the thickness of the bottle wall should be basically uniform, there should be no obvious scars or deformation, and there should be no cold bursts or cracks. The mouth of the bottle should be straight and smooth, without burrs (burrs), and the thread and bayonet fitting structure should be intact and straight. The fit between the bottle and the cap should be tight, with no slipping teeth, loose teeth, or leakage. The inside and outside of the bottle should be clean.
    2. Hose
    The hose body should be smooth, clean, uniform in thickness, without obvious scratches, and uniform in color. The hose seal must be firm and straight, and there should be no openings or wrinkles (except for normal mold indentations). The composite membrane of the hose should not float.
    3. Cover
    Inner cover: The inner cover should be complete, smooth, clean and not deformed. The inner cap should fit well with the bottle and outer cap. The inner cover should not be leaked.

    Outer cover: The outer cover should be straight, smooth, and free of breakage, cracks, and burrs (burrs). The color of the outer cover should be uniform. The thread matching structure of the outer cover should be intact and the color of the anodized aluminum or hot stamping outer cover should be uniform. The flip-top cover should be flexible to flip up, and the connecting part should be

No breaks. The fit between the cap and the bottle should be tight, without slipping teeth or loosening.
    4. Spray can.
    The tank body should be flat, without rust spots, the welds should be smooth, without obvious scratches or dents, and the color should be uniform. The rolled mouth of the spray can should be smooth and free of wrinkles, cracks and deformation. Covers of spray cans shall comply with the requirements of 5.3.2.
    5. Nozzle.
    The nozzle should be straight, clean, and free of damage and cracks. The assembly parts of the nozzle should be intact to ensure smooth spraying night.
    2. Basic quality requirements for flexible packaging.
    1. Bag
    The bag should not have obvious wrinkles, scratches, or air bubbles. The color of the bag should be uniform. The seal of the bag should be firm and there should be no openings, holes, or leakage of liquid (paste). The composite bag should be firmly composited and evenly coated.
    2. Plastic sealing
    The plastic seal should be firmly bonded without cracking. The plastic sealing surface should be clean and free of damage. There is no wrong installation, missing installation or inversion in the plastic package.
    3. Basic requirements for cosmetic packaging materials.
    1. Spindle tube
    The tube body of the spindle tube should be straight and smooth, without cracks or burrs (burrs), there should be no obvious scratches, and the color should be uniform. The parts of the spindle tube should fit appropriately to ensure that the contents can be rotated out or pushed out normally.
    2. Makeup pen
    The barrel and cover of the cosmetic pen should be smooth, straight, free of glue, and the paint film should not crack. The holder and sleeve of the cosmetic pen should fit appropriately. The color of the makeup pen should be even and consistent.
    4. Basic quality requirements for outer packaging.
    1 box
    The surface of the box should be smooth and straight, and there should be no obvious scratches, burrs (burrs), severe flattening or damage. The tightness of the box should be appropriate when opening it. When taking out the flower box, do not use your fingers to forcefully peel it open. If you pinch the edge of the cover and the bottom does not fall off, it is considered qualified. The mirror inside the box, the contents and the box should be firmly adhered, the mirror image should be good, and there should be no scratches or damage on the bottom.
    2. Printing and labeling.
    The patterns and handwriting printed on cosmetic packaging should be neat, clear, not easy to fall off, and have uniform color. The labels on cosmetic packaging should not be applied incorrectly, missed or upside down, and should be firmly pasted. Labeling requirements are in accordance with GB 5296.3.
    3. Flower box.
    The flower box should be tightly matched with the middle box packaging. The flower box should be clean, straight, and flat, with the lid tightly closed and without wrinkles, missing edges, or missing corners. The adhesive parts of the flower box should be firmly adhered without any traces, cracks or adhesion to each other. There is no wrong installation, missing installation or inversion of the product.
    4. Middle box
    The middle box should be closely matched with the flower box packaging. The middle box should be clean, straight and flat, and the lid should be closed. The adhesive parts of the middle box should be firmly adhered without any traces, cracks or mutual adhesion. There is no wrong installation, missing installation or inversion of the product. The label on the middle box should be straight, clean and complete, and the product name, specifications, box quantity and manufacturer's name should be indicated as needed.
    5. Basic quality requirements for transportation packaging
    Transportation packaging should be neat, straight, smooth, and tightly sealed. There is no wrong installation, missing installation or inversion of the product. The signs on the transportation packaging should be clear, complete, and appropriately positioned, and as necessary, the product name, producer's name and address, net content, product quantity, whole box mass (gross weight), volume, production date and shelf life or production batch number and expiry date should be indicated. Date of use.